Koni Adjustable Damper Adjustment
|
|


 |
|
-
Take the adjustment knob which is supplied and fit it to
the top of the dampers
-
To adjust the damping force, the knob has to be turned in
the direction of the arrow for increased damping and to
decrease in the opposite direction. If you feel resistance do
not use force, as the damper is in its end position
-
After adjustment remove the adjusting knob in order to
prevent possible damage of the bonnet.
WARNING: Adjust both left and right dampers
identically. Failure to do so may lead to unstable handling and
uneven tyre tread wear.
|
|
|
 |
|
-
Remove the plastic dust cover to expose the adjusting knob
(fig. 2).
-
Depress the knob fully, and hold it in that position while
adjusting (fig. 1 & 2).
-
The adjusting device has been provided with a number of
distinct stops (clicks), each of which marks an adjustment
position (fig. 4).
-
To increase rebound-damping, turn the piston rod one or
more clicks to the right (clockwise), and release the
adjusting knob. DO NOT USE FORCE!
-
Make sure that the adjusting knob springs fully back into
position.
NOTE: 26 Series range limited to 2 clicks, 30
Series range limited to 3 click
WARNING: Adjust both left and right dampers
identically. Failure to do so may lead to unstable handling and
uneven tyre tread wear.
|
|
 |
|
-
Fully compress the shock absorber, at the same time
turning the dust cap or piston rod slowly to the left
(anti-clockwise), until it is felt that the cams of the
adjusting nut engage in the recesses of the foot valve
assembly (fig. 1).
NOTE: Some shock absorbers include a bump rubber
concealed under the dust cover and this must be removed prior
to adjusting. Don’t forget to re-install.
-
Keeping the shock absorber compressed make 1 full turn
(360°) to the right (clockwise). The total range is about 5
half turns (fig. 2).
-
Extend the shock absorber vertically for at least 1 cm
without turning in order to disengage the adjusting mechanism.
The dust cap or piston rod may now be turned freely.
WARNING: Adjust both left and right dampers
identically. Failure to do so may lead to unstable handling and
uneven tyre tread wear.
|
AmD are happy to advise on the best performance suspension setup for your car, and for you as an individual driver. Just email, phone or fax us.
Suspension packages are also available by mail order within the U.K only. Unfortunately weight makes overseas postings cost-prohibitive.

 Our fitting service includes accurate suspension geometry setting on our Beissparth aligner, if you are buying the very best quality suspension components you are wasting your money if you don't have the geometry right! Changing the suspension on your car is the most important change ever, it will affect how you feel about your car from that moment on, on a daily basis. We aim to help you make the right decision.
For more details on 4 wheel alignment please see out Technical area...
|
|
|
|